Pre-ferruled Assembly - Dual ended - 350m
Pre-ferruled Assembly - Dual ended - 350m
- LC/APC preterminated ferrule outer end
- LC/APC inner end
- 2 fibres included - 1 terminated leaving spare fibre for future use
- Aginode ref: 14500411
Beschreibung
Beschreibung
Designed for fast easy FTTH installation.
- available preterminated at one or both ends
- Furrule preterminated at outer end for blowing into duct (connector body supplied to be added after blowing)
- 2 fibres included leaving 1 spare for future use
- Supplied with yellow LSZH tubing for cable protection after installation
- Blowing range in excess of 1km
- Suitable for micro-duct with internal diameter >=3.2mm
Kit content
- LC APC standard connector, green housing, 2.0mm green boot, APC ferrule
- 2F yellow blown cable, G657A1 Fiber, only one fiber is used, the other fiber is cut at the encapsulation point
- LC/APC Blown fiber connector for blowing
- LC/APC Blown fiber connector housing for LS termination.
- 2.0mm yellow LSZH tube in case cable protection is needed inside the street cabinet or the joint closure.
Packaging
- Delivered on carton spool kit : Diameter 265mm x 45mm wide
- Available in lengths:
- 25-100m: 25m increments
- 100-500m: 50m increments
Pre-ferruled Assembly - terminated both ends
KIT CONTENT
PRE-FERRULED LC/APC
