LANmark-OF Pigtail LC OM3 Tight Buffer LSZH 50/125 2m 12 Colours

Pigtail set characteristics

• Fibre assembly to terminate cable with fusion splicing
• Suitable for use in patch panels using splice cassettes
• The pigtails can be stripped in one action over a  distance of 1-2cm
• Jacket colours match fibre colours according to TIA/EIA-598-B
• Jacket colours: Blue, Orange, Green, Brown, Grey, White, Red, Black, Yellow, Violet, Pink, Turquoise
• 12 pigtails on a cardboard and wrapped in a bubblefoam
   

Fibre type

• The LANmark-OF OM3 pigtails have LANmark-OF OM3 GIGAliteFLEX fibre inside.  This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793-2-10, fibre model A1a.2b.
• The LANmark-OF OM4 pigtails have LANmark-OF OM4 GIGAliteFLEX fibre inside.  This bend insensitive multimode fibre has a small bend radius of 7,5 mm and is compliant to IEC 60793-2-10, fibre model A1a.3b.
• The LANmark-OF SM pigtails have LANmark-OF SM GIGAliteFLEX fibre inside.  These fibres are bend insensitive and compliant to ITU-T G.657.A1 and to IEC 60793-2-50, fibre model B6.a1.

Compatibility and installation practices

• Tight buffer pigtails are compatible with heat shrink splice cassettes (N890.090 and N890.095) with heat shrink protections (N890.021).
• Tight buffer pigtails are recommended to be used with tight buffer cables, i.e. with 900 um fibres. When using loose tube cables (250 um fibres) additional stress on the loose tube fibres should be limited as much as possible
• Around the splice area the pigtail needs to be stripped till the cladding before insertion in the splice tool.
• For proper alignment in the fusion splice tool the pigtail is fixed on the 900 um outer sheath. There is no need to strip the outer sheath of the pigtail on the place for fixation for getting a proper fixation.

Guarantuees

Aginode LANmark-OF pigtails are covered by Aginode warranty as described in the General Terms and Conditions.