B-LITE™ Pre-ferruled Kits

Designed for fast easy FTTH installation.

• available preterminated at one or both ends
• Furrule preterminated at outer end for blowing into duct (connector body supplied to be added after blowing) 
• 2 fibres included leaving 1 spare for future use 
• Supplied with yellow LSZH tubing for cable protection after installation
• Blowing range in excess of 1km
• Suitable for micro-duct with internal diameter >=3.2mm 

Kit content

• LC APC standard connector, green housing, 2.0mm green boot, APC ferrule
• 2F yellow blown cable, G657A1 Fiber, only one fiber is used, the other fiber is cut at the encapsulation point
• LC/APC Blown fiber connector for blowing
• LC/APC Blown fiber connector housing for LS termination.
• 2.0mm yellow LSZH tube in case cable protection is needed inside the street cabinet or the joint closure.

 Packaging

• Delivered on carton spool kit : Diameter 265mm x 45mm wide
• Available in lengths:
       - 25-100m:   25m increments
       - 100-500m: 50m increments