- À propos d'Aginode
- Data Network Solutions
- Réseaux télécom - Infrastructures
- Produits
-
Ressources
- Ressources
- Documentation
- Blog
-
Success-stories
- Présentation
- Développement d'Innoasis en Norvège
- Campus Eemsdelta
- École hôtelière de La Haye
- Emergency covid hospital, Hong Kong
- Société du Grand Paris
- Centrin Datacentres
- Airbus
- Hôtel de ville historique d'Athènes
- Câblage des Studios Pinewood pour la haute définition
- L'Université Johan Wolfgang Goethe de Francfort
- Nouvel Hôpital Universitaire au Danemark
- Université de Toulouse
- Le Nouveau Centre Hospitalier de Maubeuge (CHM) : un modèle pour les hôpitaux du futur
- Webinaires
- Outils logiciels
- Garantie
- Actualités et événements
- Recherche
- Contactez-nous
- Comparer
- Se connecter
B-LITE™ Pre-ferruled Kits
B-LITE™ Pre-ferruled Kits
Cable assemblies with pre-terminated ferrule for blowing into micro-ducts
Lire plus
Description
Description
Designed for fast easy FTTH installation.
- available preterminated at one or both ends
- Furrule preterminated at outer end for blowing into duct (connector body supplied to be added after blowing)
- 2 fibres included leaving 1 spare for future use
- Supplied with yellow LSZH tubing for cable protection after installation
- Blowing range in excess of 1km
- Suitable for micro-duct with internal diameter >=3.2mm
Kit content
- LC APC standard connector, green housing, 2.0mm green boot, APC ferrule
- 2F yellow blown cable, G657A1 Fiber, only one fiber is used, the other fiber is cut at the encapsulation point
- LC/APC Blown fiber connector for blowing
- LC/APC Blown fiber connector housing for LS termination.
- 2.0mm yellow LSZH tube in case cable protection is needed inside the street cabinet or the joint closure.
Packaging
- Delivered on carton spool kit : Diameter 265mm x 45mm wide
- Available in lengths:
- 25-100m: 25m increments
- 100-500m: 50m increments
Pre-ferruled Assembly - terminated both ends
KIT CONTENT
PRE-FERRULED LC/APC
Caractéristiques
Caractéristiques
Caractéristiques de construction
Caractéristiques de construction
Couleur
Jaune
Dielectric
Yes
Gaine extérieure
PE
Longitudinally watertight
Oui
Type de connecteur
LC/APC both ends
Type de fibres optiques
SM (G657.A1)
Caractéristiques dimensionnelles
Caractéristiques dimensionnelles
Cable Diameter
1,1 mm
Masse approximative
- kg/km
Nombre de fibres optiques
1
Nombre de fibres optiques, plage
1 ... 4
Caractéristiques de transmission
Caractéristiques de transmission
Insertion Loss, maximum, dB
0,25 dB
Insertion loss, typical value
0,12 dB
Return Loss, Minimum, dB
65 dB
Caractéristiques d'utilisation
Caractéristiques d'utilisation
Application
Souterrain
Conditionnement
Cardboard Spool
Rayon de courbure minimum - installé
30 mm
Température ambiante d'installation, plage
-10 ... 40 °C
Type d'installation
Outdoor - Microduct blowable
Ressources
Ressources
Nos sites web
Sélectionnez votre pays pour trouver nos produits et solutions
-
Afrique
- Afrique
- Côte d'Ivoire
- Ghana
- Maroc
- Zone Afrique du Nord
- Amériques
- Asie
- Europe
- Océanie