LANmark-OF Sliding Snap-In Patch Panels

For easier organization of the pigtails and the fibres of the cables the new Snap-In panels now feature large splice trays.  These splice trays allow a second ring for fibre inside. The outer ring is typical used for the fibres of the cables, while in the inner loop the fibres of the pigtails are organised.

The splice cassettes also feature a lifting functionality for improved ease of installation and inspection. Splice trays, splice protectors and pigtails need to be ordered separately.

Inside the patch panel the following splice cassettes can be installed:

• N890.090: LANmark-OF Splice Cassette Heat Shrink Protectors
• N890.091: LANmark-OF Splice Cassette Aluminum Protectors
• N890.092: LANmark-OF Splice Cassette Cover

The patch panel is optimized for installation of the LANmark-OF SC/LC Pre-Terms.  The cable glands of the Pre-Term allow a fast and solid fixing of the cables in the 8 slots with a diameter of 20mm.  There is ample space inside the patch panel to organize the flexible fan-out of the Pre-Term.

The newly developed sliding tray now features plastic latches.

With these latches the panel trays can be locked in 3 different positions:

• The operational position when the tray is completely in the chassis
• The patching position that allows to pull the tray forward by 87mm to facilitate patching in dense areas
• The safety and maintenance position: an additional stop before complete removal of the tray out of the chassis

Panels are fully painted Black.  The LANmark-OF Snap-In panels have the same look and feel as the LANmark copper Snap-In panels.

When the panel is installed in a rack the distance between the rack vertical and the rear of the panel is 269mm.  The adaptor plane is recessed by 13mm compared to the rack vertical. In the patching position the adaptor plane is 74 mm in front of the rack vertical.